rem disable internet
rem delete internet
rem disable basic
rem delete basic

eth ip ena
eth ip addr 192.168.1.1 255.255.255.0

rem add basic
rem setproto rfc1483 basic
rem setpvc 8*35 basic
rem enabridge basic
rem setbroptions pppoeonly on basic
rem setbroptions stp off basic

rem add internet
rem setpppoeservice * internet
rem setpppoptions lcpecho on internet
rem setiptranslate on internet
rem addiproute 0.0.0.0 0.0.0.0 1 internet
rem setoursysname myusername@nettally.com internet
rem setourpasswd mypassword internet
rem disauthen internet
rem setminline 1 internet
rem setmaxline 1 internet

sys community mypassword

save all
reboot




By default, DHCP is already enabled with the following settings...
(command:  dhcp list)
Subnet 192.168.1.0, enabled
       When DHCP servers are active . stop
       Mask ......................... 255.255.255.0
       first ip address ............. 192.168.1.2
       last ip address .............. 192.168.1.20
       lease ........................ default
       bootp ........................ not allowed
       bootp server ................. none
       bootp file ................... n/a

Other handy commands to see current configuration:
rem list
eth list
dhcp list

Make sure the telnet password is changed before enabling NAT:
rem setiptranslate on internet
rem setSrcIpAddr 0.0.0.0 0.0.0.0 internet
rem addServer 192.168.1.1 tcp telnet internet
save all
reboot