Network Tallahassee
VoIP Features
Contents
- VoIP = Voice over Internet Protocol (sometimes called digital voice)
- Grandstream HandyTone 502 (HT502) & 701 (HT701) Analog Telephone Adaptor
- Zoom ADSL X6v 5695 / 5697
Grandstream HandyTone 502 (HT502) & 701 (HT701) Analog Telephone Adaptor
The information in the table below was extracted from the following:
Grandstream HandyTone 502 (HT502) User Manual
Grandstream HandyTone 701 (HT701) User Manual
| Key | Call Feature | Description |
|---|---|---|
| 123 | Voicemail | |
| *02 | Forcing a Codec | (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32), *0272640 (G726-r40), *027201 (iLBC) |
| *03 | Disable LEC | (per call) Dial "*03" + "number". No dial tone is played in the middle. |
| *16 | Enable SRTP | Enable Secure Real-time Transport Protocol (SRTP) |
| *17 | Disable SRTP | Disable Secure Real-time Transport Protocol (SRTP) |
| *30 | Block Caller ID | (for all subsequent calls) |
| *31 | Send Caller ID | (for all subsequent calls) |
| *47 | Direct IP Calling | Dial "*47" + "IP address". No dial tone is played in the middle. See the Direct IP Calling section on page 12 of the user manual. |
| *50 | Disable Call Waiting | (for all subsequent calls) |
| *51 | Enable Call Waiting | (for all subsequent calls) |
| *67 | Block Caller ID | (per call). Dial "*67" + "number". No dial tone is played in the middle. |
| *69 | Call Return Service | Dial *69 and the phone will dial the last incoming phone number received. |
| *70 | Disable Call Waiting | (per call). Dial "*70" + "number". No dial tone is played in the middle. |
| *71 | Enable Call Waiting | (per call). Dial "*71" + "number". No dial tone is played in the middle. |
| *72 | Unconditional Call Forward | Dial "*72" and then the forwarding number followed by "#". Wait for dial tone and hang up. (dial tone indicates successful forward) |
| *73 | Cancel Unconditional Call Forward | To cancel "Unconditional Call Forward", dial "*73", wait for dial tone, then hang up. |
| *74 | Enable Paging Call | Dial "*74" and then the destination phone number you want to page. |
| *78 | Enable Do Not Disturb (DND) | When enabled all incoming calls are rejected. |
| *79 | Disable Do Not Disturb (DND) | When disabled, incoming calls are accepted |
| *82 | Send Caller ID | (per call). Dial "*82" + "number". No dial tone is played in the middle. |
| *87 | Blind Transfer | |
| *90 | Busy Call Forward | Dial "*90" and then the forwarding number followed by "#". Wait for dial tone then hang up. |
| *91 | Cancel Busy Call Forward | To cancel "Busy Call Forward", dial "*91", wait for dial tone, then hang up. |
| *92 | Delayed Call Forward | Dial "*92" and then the forwarding number followed by "#". Wait for dial tone then hang up. |
| *93 | Cancel Delayed Call Forward | To cancel Delayed Call Forward, dial "*93", wait for dial tone, then hang up. |
| Flash/Hook | Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call. | |
| # | Re-Dial | Pressing pound sign will serve as Re-Dial key. |
Zoom ADSL X6v 5695 / 5697
The information in the table below was extracted from the following:
X6v VoIP Features Technical Reference
| Key | Call Feature | Description |
|---|---|---|
| 123 | Voicemail | |
| *55 | Call Waiting Enable | Enable call waiting on all calls |
| *56 | Call Waiting Disable | Disable call waiting on all calls |
| *57 | Call Trace | Call trace (reserved) |
| *58 | Call Waiting Caller ID Enable | Enable call waiting caller ID generation |
| *59 | Call Waiting Caller ID Disable | Disable call waiting caller ID generation |
| *60 | Blocked Number Enable | Enable call blocking feature |
| *61 | Distinctive Ring Enable | Enable distinctive ringing feature |
| *62 | Caller ID Outbound Disable | Block caller ID on all outbound calls |
| *63 | Priority Forward Enable | Enable priority call forwarding feature |
| *64 | Disturb Accept Enable | Enable do not disturb accept call feature |
| *65 | Caller ID Inbound Enable | Enable caller ID generation |
| *66 | Busy Number Redial | Busy number redial |
| *67 | Caller ID Outbound One-time Enable | Unblock caller ID for one call |
| *68 | Caller ID Outbound One-time Disable | Block caller ID for one call |
| *69 | Caller Redial | Call the last caller |
| *70 | Call Waiting One-time Disable | Deactivate call waiting for current call |
| *71 | Call Waiting One-time Enable | Enable call waiting for current call |
| *72 | Call Forward Enable | Enable call forwarding to number that follows |
| *73 | Call Forward Disable | Cancel call forwarding of non-priority calls |
| *74 | One Digit Speed Dial Program | Program speed dials 0 - 7 |
| *75 | Two Digit Speed Dial Program | Program speed dials 20 - 39 |
| *77 | Block Anonymous Enable | Block all anonymous calls |
| *78 | Do Not Disturb Enable | Enter do not disturb state |
| *79 | Do Not Disturb Disable | Exit do no disturb state |
| *80 | Blocked Number Disable | Cancel call lock - remove optional number from blocked call list, or disable call blocking |
| *81 | Distinctive Ring Disable | Disable distinctive ringing |
| *82 | Caller ID Outbound Enable | Unblock caller ID on all outbound calls |
| *83 | Priority Forward Disable | Cancel priority call forward |
| *84 | Disturb Accept Disable | Disable do not disturb accept call feature |
| *85 | Caller ID Inbound Disable | Disable caller ID generation |
| *86 | Busy Number Redial Cancel | Cancel busy redial |
| *87 | Block Anonymous Disable | Unblock anonymous calls |
| *89 | Caller Redial Cancel | Cancel calling last caller |
| *92 | Forward No Answer Enable | Call forward when no answer - number follows |
| *93 | Forward No Answer Disable | Cancel call forward when no answer |
| *94 | Forward Busy Enable | Call forward when busy - number follows |
| *95 | Forward Busy Disable | Cancel call forward when busy |
| *96 | Outgoing Block Enable | Enable Block Outgoing VoIP calls feature |
| *97 | Outgoing Block Disable | Disable Block Outgoing VoIP calls feature |
| *98 | Unattended Transfer | Execute Hook Flash followed by *98 to initiate unattended transfer |